09-25-2023 02:31 PM
It's a brand new G3270 printer and the black ink works fine. I've tried doing clean and deep clean, etc. but the colour doesn't work and the tubes are completely empty (tanks are full). I've installed the Printer Assistant Tool, but there's no option to do an ink flush. Does anyone know how I can do that?
09-25-2023 10:24 PM
Hi,
You can fine " replace ink in print head" menu to filled ink in the tube.
Make sure you have enough ink in the ink tank of each color than form the printer's LCD follow the step below:
Maintenance - Replace ink in print head.
Wait until ink filled to the tube than all color should work fine.
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.