cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Folded cards in MX922

David_Pavlich
Contributor

Is there a way to print 5X7 folded cards in above printer?  Open dimension is 7X10.  Thanks!

 

David

6 REPLIES 6

jrhoffman75
Legend
Legend

http://www.redrivercatalog.com/8-tips-for-greeting-card-printing.html

 

 

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

Thanks, John...I ordered cards from Red River.  However I found out after the fact that the M922 will only handle 17-28 lb paper after I contacted Canon support.  I ordered 60 lb.  My mistake.  But I guess that's what I should expect from an $87 printer. 

 

David

David_Pavlich
Contributor

Well, after about 15 or so failures, I finally got it figured out.  Probably not the way Canon would have expected it, but I got it working.  All I could see was me telling my wife that I needed another printer.  Not good! 🙂

 

David

I'm trying to add additional greetings and signature to a preprinted greeting card on my MX922 printer. One card went through well but every one after that gets jammed in the rear feeder. Any suggestions?

Do you know the weight of the card paper? See Message 3 above.

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

I don't know the weight of the card paper. They're boxed Hallmark Christmas cards -- if that helps. I had an iP8720 on which I printed greeting cards in the past without a problem. I thought this would handle them as well.
Announcements