01-04-2016 03:12 PM
Yeah, so I have a Canon Pixma MG7150 printer, and it's touchscreen stopped working. After the last time I used my printer I shut it down and unplugged it from the wall. Now, three weeks later, I plugged it back in and the 'electrical hazard' light lit up. I tried to turn the printer on, but only the 'on' button lit up next to the 'electrical hasard'. No noice or movement nothing. I tried unplugging it again for 15 minutes or so and then turning it on again but no use. I also tried reseting the machine manually, sadly without any succes for there are no clear istructions for this certain model that I could find. Please. Help.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.