07-22-2019 05:28 PM
Tried to install drier. Told me to connect computer to laptop. Says printer cannot be detected. Using Windows 10
07-26-2019 01:18 PM
Hi didymus69,
Are you trying to connect the printer via a printer usb cord( A to B usb) or were you trying to connect it via Bluetooth since the printer does not have the ability to connect to a router/modem.
We look forward to your reply.
07-26-2019 04:04 PM
Yes I am using the printer supplied cable for USB. I had tried to connect wirelessly before.
07-29-2019 12:14 PM
Hi didymus69,
Please disconnect the USB cable from your PIXMA MX360.
Next, please download the latest driver:
1. Visit Canon's website at: http://usa.canon.com/support
2. Type PIXMA MX360 in the "Enter a model" box and click GO.
3. In the Drivers & Downloads section, please click the Select button next to the MX360 series MP Driver.
4. Click the Download button.
5. If a Save dialog box appears, click Save.
6. Once the download is complete, open your Downloads folder.
7. Double click [mp68-win-mx360-1_01-ejs.exe]. Files will extract.
8. Follow the on screen prompts and the installation will complete.
07-29-2019 01:18 PM
Thansk Patrick, I made a mistake in typing my model. It is actualy MX 340. I will look for that driver, that may be my issue.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.