12-10-2018 01:05 PM - edited 12-13-2018 04:38 PM
I updated to DPP version 4.9.20 on a Windows 10 PC with 32 GB Ram and found that after several minutes of use DPP would pause or hang for a couple of seconds and the Windows spinning circle warning would display. This pausing would happen repeatedly every couple of seconds making DPP almost unusable. The Windows Resource Monitor showed that the amount of memory under Working Set increases from around 977,000 KB to around1,500,000 KB for DPP4 as DPP goes from no problem to repeated pausing. I uninstalled DPP 4.9.20, rebooted and reinstalled the old version DPP4, 4.6.30 but still had the same problem with the constant pausing and increasing use of memory even though this version worked without a problem on this computer. Canon's technical support had not heard of the problem and was of no help. Has anyone else expericenced this problem and come up with a solution?
Solved! Go to Solution.
12-24-2018 12:35 AM
I think I have really solved the problem with Canon Digital Photo Professional 4 giving the spinning wheel wait symbol and pausing constantly. I did a drive cleanup on the C: drive and on the drive I have my RAW files on to get rid of all temporary files, etc. I was thinking maybe when I installed the updated DPP 4 that it may not have cleaned up all of its temporary files, or a temporary file got corrupted etc. So tonight I have been able to work with DPP for 4 hours without any spinning wheel wait symbols and pauses.
05-21-2019 04:34 PM
05-22-2019 04:22 PM
05-22-2019 05:13 PM
It does seem strange. I tried to update the Nvidia Driver (it was due time anyway), put it did not help in any way. The problem persists (i have tried change all the Media player and DPP startup folders, but it doesn't make any difference).
I know this thing is file related, but changing startup folders has no effect on my system, so there has got to be something more to it.
At least now i know that i can open the Task manager, "end" Nvidia container process, but not stop the "Nvidia DIsplay Container LS" Service. As long as i boot that process, i will have peace for the remainder of my session with DPP.
05-22-2019 06:08 PM
Depending upon your card, it may have also installed Geforce experience from Nvidia as part of the standard install. Unless you are using the machine for gaming, get rid of this because it has caused a lot of Windows 10 issues. I installed a Nvidia RTX 2060 recently and had to remove a bunch of extra stuff that auto install with the current driver download.
I have a couple of instances of NVIDIA container running, one with Display Container LS nested within that takes care of running the NVIDIA configuration program. If you let Geforce experience live, it will launch a lot of other stuff that you probably don't want.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 184.108.40.206
PowerShot SX420 IS - Version 220.127.116.11
PowerShot 620 HS - Version 18.104.22.168
PowerShot SX720 HS - Version 22.214.171.124
PowerShot G1X Mark III - Version 126.96.36.199
PowerShot G7X Mark II - Version 188.8.131.52
PowerShot G9X Mark II - Version 184.108.40.206
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.