Camcorders
cancel
Showing results for 
Search instead for 
Did you mean: 

Posts

how to get the cassette to eject

I was trying to get my DV part of my camcord to pick up on my computer.  Which I am having a hard time with.   So I took out the firewire card and restarted the computer and then turn it off again.  Put the firewire card back in.  I was hooking up th...

USB microphone

Can I plug a USB microphone into a Vixia HF R30 camcorder?

m_brown by Apprentice
  • 2935 Views
  • 1 replies
  • 0 likes

Legria HFR306 file restoration after data recovery?

Someone deleted the contents of their SDHC card and asked me if I could try and recover their recent wedding videos. I recovered all the videos to hard disk. Now I want to try and restore the files I recovered back to the camcorder sdhc card so they ...

mips by Apprentice
  • 2871 Views
  • 1 replies
  • 0 likes

PF30 question and bit rate question

I just started to record using the PF30 frame rate with my HF100. When I played it back via hdmi to my plasma set, the set indicated a 1080i signal. Doesn't this defeat the purpose of using a progressive frame rate when it interlaces it for viewing? ...

tpb1075 by Apprentice
  • 2690 Views
  • 0 replies
  • 0 likes

SD Card error

What could possibly be wrong if I am constantly receiving a card error message? This  happens to every card I insert in the machine. Because of this I am unable to do any recording. Please help me resolve this issue.

roddie57 by Apprentice
  • 4111 Views
  • 4 replies
  • 0 likes

HF G10 - Supplied software different than online software?

I just purchased a Canon HF G10. The software included was Pixela Videobrowser v 1.2 and Transfer Utility v 1.1. However, when I went to the Canon website to see if I had the most recent version of these programs, under the Software for this camera t...

TommyG by Contributor
  • 3499 Views
  • 4 replies
  • 1 likes

8mm

8mm filmOptions ‎03-18-2013 01:42 PM I want to convert old 8mm film to digital, but not sure about converting to a high definition (HD) format or just standard digital format (SD).  My goal is to end have the best quality, but also to be able to play...

Jules by Contributor
  • 2480 Views
  • 0 replies
  • 0 likes

8mm film

I want to convert old 8mm film to digital, but not sure about converting to a high definition (HD) format or just standard digital format (SD).  My goal is to end have the best quality, but also to be able to play back on my computer, HDTV and use th...

Jules by Contributor
  • 3061 Views
  • 0 replies
  • 0 likes

Canon Vixia HF200 and compatible software for Vista 64 bit.

This Canon HF 200 came with the Pixela ImageMixer 3 SE software. The problem is, ...it's  not compatible with Windows VIsta 64 bit.  The Instructions note only 32 bit,  and this VIsta  64, will not accept this software..  I'm looking for the simplest...

brmc by Apprentice
  • 2870 Views
  • 1 replies
  • 0 likes

Transferring video from XA10

I am using the USB cable to connect to my iMac to transfer the video for me to edit with Final Cut Pro X. When connected it brings up the entire contents of the camera memory card as Drive J. How can I only select those files which I had selected on ...

philipc by Apprentice
  • 2708 Views
  • 0 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements

07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500