Showing results for 
Search instead for 
Did you mean: 


Transfer video to computer without Corel disk

I have an older HR10 camcorder, and I want to digitize my video. However, it seems the Corel application disk is required, and I no longer have it. Is there another way to transfer the video files to my Mac?

bbzoomer by Apprentice
  • 3 replies

G60 noisy clicks at start up.

I just received my G60 and it makes a start up noise when turning it on. Some clicking and minor whirring. Is this normal? I turned off the stabilization, but it still makes the sound. I suspect it might be the ND filters initiating--for some reason-...

Despotes by Apprentice
  • 0 replies

Pixela Splitting Files

A novice here that does not know about Fat32, etc. but usually I stop and start my Vixea HF M41 between scenes so that I end up with many smallish clips. On my recent taping I left the camera on the record mode several times for periods of 17 to 20 m...

Mikey_M by Apprentice
  • 2 replies

Just bought a Vixia G60, Looking for Guidance!

Hello! I am an artist and I have been really excited for two years saving money for my next big project: making time-lapse videos of my work! I just got a Vixia HF G60 in the mail and was wondering if there were any tips from the community on some go...

Speedlite and camcorders

My HF G60 camcorder has a hot shoe. It can also take photos. Can a Speedlite work with it to give it Flash capabilities?

pepegot1 by Apprentice
  • 1 replies

No stereo when recording with external mic

Hello Community,After many weeks in knowing how to take the buzz out of my audio on my Vixia HF R800 camcorder, I now have a problem with only hearing audio on one side (left) both with speakers or with headphones. My set up is like this. My wireless...

External Mic issues:

After searching for months on what kind of mini jack to plug into my Vixia HF R800 camcorder (TRRS 3.5mm), and after turning the volume way way down to eliminate the buzz sound, I now have an issue with only hearing sound out of one speaker (with ear...

ZR30MC No Signal on CRT Tv

When I went to plug in my Camcorder into my CRT (Sansui COM311ADB)  through the yellow AV cable, I checked line 1 & 2 and I had no signal. I'm not sure what to do in order to get a signal on the tv as I already have read the manual and made sure that...

Sossboy by Contributor
  • 1 replies

Elura 60 xfer of images to computer.

I am seeking info on transferring captured video from Canon Elura 60 to computer.I have a cord with 3 RCA connectors and an A/V on the other end.  When I hook it up according to the user manual directions, I do not get a signal from the Camcorder to ...

Canon HF G50 Start up noised

Had this from new for almost 9 months, used regularly. Occasionally on start up iris opening motor jeeps running for several seconds. Never did that before. Sounds like a drive mechanism slipping.Should I bring it in for warranty work?

Boomer by Apprentice
  • 5 replies

Canon xa50 covert mxf files problem

Hihow do i transfer 4K XF-AVC footage from the canon xa50 mxf files to movie studio 17 which won't accept mxf files Ive tried various file converters videoproc ect which converts the video but im hearing no audio after conversion but i am getting vid...

manley by Contributor
  • 13 replies

XC10 Cfast error

Hello. I just purchased a used XC10. I bought a new Cfast card - SP Cinema PRO Cfast 2.0 256 GB - from Amazon. When I try to initialize the card I get a message saying "process terminated with error." Is that card not compatible with this camera for ...

Resolved! What Type Of SD Cards Are Compatible With The ZR30MC?

I bought a SDXC 64GB SanDisk SD card and I keep getting a "CARD ERROR" message on my camcorder. I have formatted the card and all the other troubleshooting options. I am now wondering If either the card type (SDXC) is incompatible or the card reader ...

Sossboy by Contributor
  • 4 replies
Getting started

New to the community? Here's some information to help you get acquainted:

06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version is available for EOS R5 C
03/23/2022: New firmware version is available for EOS-C70
03/22/2022: New firmware version 1.2.0 is available for PowerShot PICK
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM