07-09-2020 05:40 PM
Just received the Vixia HF R800 camcorder and am afraid I am missing a huge step. Powered up, connected to laptop (Lenovo ThinkPad) with OBS and the laptop isn't recongizing the camcorder, and it doesnt look like the camcorder is recongizing it's connected either. Using HDMI connector. I'm a tech rookie and did all the restarts, power on/off, etc and this is starting to really bum us out. We want to use the VIXIA for live streaming but can't get past step 2 (step 1 was it turned on and works as a camcorder). Help, please!!!
07-10-2020 01:50 AM
Have you done this kind of live streaming on this computer before? Most often the issue I find is that most computers have an HDMI port that is output only and doesn't allow a signal input which would mean a separate capture device would be needed to convert a USB connection to HDMI input.
Otherwise, as long as the camcorder is connected to an HDMI input and switched on in the camera recording mode, the signal will go through the HDMI cable at 1080 60i.
07-10-2020 12:29 PM
Thanks @Mark35mmF2. I have NOT done any streaming with this computer before. Your insight makes sense and will likely need to go the route of a capture device to get this camcorder to do what I want it to. Thanks for the quick reply!
10-25-2021 08:07 PM
I can report the same issue. I have several other video cameras which work right out of the box, but not this model.
10-26-2021 03:22 AM
Thanks for checking in.
It is possible that your setup does not work well with the output signal of the camera, which is 1920 x 1080 at 60 frames per second interlaced, as Mark mentioned. Other cameras have more output options.
Doing livestreaming from the camera to the computer usually involves an I/O device that turns the signal into something that the computer can more easily work with. That's why it might help if you elabobrate on your setup.
10-26-2021 04:55 AM
Appreciate your response. Since posting, the camera is boxed up and I got a new Panasonic HC-V770
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 18.104.22.168
PowerShot SX420 IS - Version 22.214.171.124
PowerShot 620 HS - Version 126.96.36.199
PowerShot SX720 HS - Version 188.8.131.52
PowerShot G1X Mark III - Version 184.108.40.206
PowerShot G7X Mark II - Version 220.127.116.11
PowerShot G9X Mark II - Version 18.104.22.168
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.