02-02-2023 03:06 AM - last edited on 02-02-2023 08:28 AM by Danny
02-02-2023 07:33 AM
The ST-E10 requires the new Canon multifunction hot shoe and a flash with radio (RT) versions.
If your gear meets these requirements you are good to go.
02-02-2023 08:32 AM
The ST-E10 is RF only, so it will not work with the 430EX-II
02-20-2023 01:31 PM
It also won't work with the EOS R either, because the R doesn't have a new multi-function shoe to match the multi-function foot of the ST-E10.
It won't work with the 430 EX II because that flash supports optical off-camera control only, while the ST-E10 supports RF radio but not optical.
So, sadly, the answer is No. The ST-E2, if you can find one (maybe used on Ebay?) would do the job for you, though.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 184.108.40.206
PowerShot SX420 IS - Version 220.127.116.11
PowerShot 620 HS - Version 18.104.22.168
PowerShot SX720 HS - Version 22.214.171.124
PowerShot G1X Mark III - Version 126.96.36.199
PowerShot G7X Mark II - Version 188.8.131.52
PowerShot G9X Mark II - Version 184.108.40.206
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.