10-06-2016 11:00 PM
I am using 600EX-RT speedlites off camera controlled by the ST-E3-RT Transmitter. How do I disable the Wireless Remote Ready Light that is flashing red on the front of the speedlites when they are in slave mode?
I have already used C.Fn-08 to disable(1) the AF assist beam but that did not resolve the issue.
Hoping that someone has a better solution that the gaffers tape I am about to apply to the speedlights.
10-07-2016 07:01 PM
Did you try setting this option? Set it to 1
10-07-2016 07:28 PM
Thank you Diverhank. That worked. I'm guessing that by the time I had read that far down the list my brain had shut off...
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 220.127.116.11
PowerShot SX420 IS - Version 18.104.22.168
PowerShot 620 HS - Version 22.214.171.124
PowerShot SX720 HS - Version 126.96.36.199
PowerShot G1X Mark III - Version 188.8.131.52
PowerShot G7X Mark II - Version 184.108.40.206
PowerShot G9X Mark II - Version 220.127.116.11
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.