10-08-2021
03:40 PM
- last edited on
10-17-2023
11:19 AM
by
Danny
I need to be able to record on an SD card while simultaneously sending the signal out to an external monitor. Having read the manual (I am a newbie with the XA11), I cant find out how to do this or even if it is possible. Can anyone help?
Solved! Go to Solution.
10-09-2021 01:12 AM
Hi there,
You should be able to output a signal through HDMI while simultaneaously recording to the SD card, I dont believe this can be done through USB though.
10-09-2021 01:12 AM
Hi there,
You should be able to output a signal through HDMI while simultaneaously recording to the SD card, I dont believe this can be done through USB though.
10-16-2021 12:03 PM
Works as you suggest. Thanks.
09-29-2023 04:26 PM
Hi, I am having trouble with getting my laptop with windows 10 to recognize Xa11 camcorder. I followed all the how to, have the correct cables, including the video capture box for input. I down loaded OBS, tried adding it as a camera and nothing. do I need a driver or change something in my settings? Thank you for any advice.
09-29-2023 05:25 PM
Please start a new topic for this issue. This is a 2-year topic you replied to for a different issue.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.