10-08-2021
03:40 PM
- last edited on
10-17-2023
11:19 AM
by
Danny
I need to be able to record on an SD card while simultaneously sending the signal out to an external monitor. Having read the manual (I am a newbie with the XA11), I cant find out how to do this or even if it is possible. Can anyone help?
Solved! Go to Solution.
10-09-2021 01:12 AM
Hi there,
You should be able to output a signal through HDMI while simultaneaously recording to the SD card, I dont believe this can be done through USB though.
10-09-2021 01:12 AM
Hi there,
You should be able to output a signal through HDMI while simultaneaously recording to the SD card, I dont believe this can be done through USB though.
10-16-2021 12:03 PM
Works as you suggest. Thanks.
09-29-2023 04:26 PM
Hi, I am having trouble with getting my laptop with windows 10 to recognize Xa11 camcorder. I followed all the how to, have the correct cables, including the video capture box for input. I down loaded OBS, tried adding it as a camera and nothing. do I need a driver or change something in my settings? Thank you for any advice.
09-29-2023 05:25 PM
Please start a new topic for this issue. This is a 2-year topic you replied to for a different issue.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.