Canon Community Canon Community
 


Reply
New Contributor
Posts: 1
Registered: ‎04-12-2013

canon Pixma 9000

I have a Canon Pixma Pro9000 that is all of a suddent printing very lightly ink wise no matter how I set the paper and quality of print.  I have updated the drivers, done all of the maintenance, and yet everything we print is super light.  I tried going back to all of the printer defaults and even did a Windows System restore to a date prior to when we had the problem with no luck.  

 

Any ideas?

 

Thanks!

Product Expert
Posts: 286
Registered: ‎01-16-2013

Re: canon Pixma 9000

Hi cg6842399,

 

I know you said you did the maintenance, but I would like to know specifically how the Nozzle Check prints out when you attempt to print it.  You can print the Nozzle Check by holding down the resume button for two flashes of the printer's light, then let go.  A correct Nozzle Check should look like this:


 

Does your Nozzle Check print correctly?

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Highlighted
VIP
Posts: 11,109
Registered: ‎12-07-2012

Re: canon Pixma 9000

It is essential your monitor and your printer show the same thing. If this is not the case adjusting your printer is fruitless. Did you happen to change monitors recently?

There's no LCD screen (PictBridge operations are controlled through the camera's LCD) and no card reader. If you have such a camera ( PictBridge) try printing directly from it and see if the problem still exists.

Until you isolate whether it is a problem with the printer or your computer it will be like chasing your tail.

EOS 1DX and 1D Mk IV, even less and less other stuff.
powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement