Showing results for 
Show  only  | Search instead for 
Did you mean: 

bought the Cannon pro 100 and not printing ccolor on the screen any suggestions welcome I've tried e


I have the Cannon Pro-100 and it doesn't print the colors I see in photoshop on the screen..any suggestions welcome Tried frustrating and no matter what preerence it prints almost exactly the same..not what is on my screen. help




Hello Sisboom40,


So that the Community can help you better, we will need to know exactly which operating system is running on your computer and which apps you're trying to print from. That, and any other details you'd like to give will help the Community better understand your issue!

If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).


Thanks and have a great day!

I've been on hold for 15 minutes I called the number you suggested...

Going on 25 minutes is there another number?

Hello Sisboom40,


A technician will be with you shortly. We apologize for the delay and appreciate your patience.

Did you do as I instructed you?  And you are still getting poor results? Smiley Frustrated

As John Hoffman stated, it is most likely your monitor is off.  Not the printer.

EOS 1DX and 1D Mk IV and several lenses!

Thanks so much for checking in I have done everything spent hours on the phone with cannon and there was very little perceptual change..going back to Epson I'm afraid. Due to the pigment vs ink character ..I appreciate you so much!!

Let me be frank, thousands of us use the Pro-100 with fantastic results.  You can, too. There is no reason why you should not be able to make great prints.  You must do as I have outlined.

Unless and barring a printer malfunction of course which is unlikely but possibile.  It is a brand new printer?

EOS 1DX and 1D Mk IV and several lenses!


See this article and print the test image.


Its been my experience with my printers and friends I've helped that the problem is the monitor calibration and not the printer.


(Thats not to say you might have a printer problem.)

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic
08/18/2023: Canon EOS R5 C training series is released.

07/31/2023: New firmware updates are available.

CR-N700 - Version 1.2.0

CR-N500 - Version 1.3.0

CR-N300 - Version 1.3.0

CR-X300 - Version 1.1.0

06/30/2023: New firmware version is available for EOS-R5 C

05/31/2023: New firmware updates are available.

EOS R6 Mark II - Version 1.1.2

EOS R6 - Version 1.8.2

EOS R7 - Version 1.3.1

05/18/2023: New firmware updates are available.

EOS Rebel T100 - Version 1.1.0

EOS Rebel T7 - Version 1.2.0

EOS 5D Mark IV - Version 1.4.0

EOS 6D Mark II - Version 1.2.0

PowerShot Elph 360HS - Version

PowerShot SX420 IS - Version

PowerShot 620 HS - Version

PowerShot SX720 HS - Version

PowerShot G1X Mark III - Version

PowerShot G7X Mark II - Version

PowerShot G9X Mark II - Version


04/20/2023: New firmware version 1.4.1 is available for EOS R3

03/30/2023: New firmware updates are available.

EOS R5 - Version 1.8.1

EOS 1DX Mark III- Version 1.7.1

Speedlite EL-1 - Version 1.0.2

03/30/2023: Product Advisory for EF50 F1.2 L USM

03/30/2023: Product Advisory for EOS R10

02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5