Professional Photo Printers
cancel
Showing results for 
Search instead for 
Did you mean: 

Posts

Print Studio Pro

Print Studio Pro is faliling to load within the latest PS.   It will not load period in the latest LR.   I have uninstalled/re-installed several times. It was working previously in PS but since the update no dice.  Have tried reverting back to the Pr...

Resolved! Pro-100 Network Issue

I'm running my printer on OSX 10.9.5 as a wireless shared printer.  I just installed a new router and of course my printer doesn't see the network anymore.  Do I have to remove the printer and re-install it or is there a way to configure it for my ne...

Ken_k by Contributor
  • 4116 Views
  • 6 replies
  • 0 likes

Resolved! Question about ink management

Hello, I try to print something every six weeks or so to keep the ink from drying out. I am wondering if I actually need to print or is just turning on the printer enough to move the ink. Thanks. <edit> I am using a Canon Pro 10.

nvw by Enthusiast
  • 2143 Views
  • 3 replies
  • 0 likes

Profiles for Epson Papers

I recently noticed on the Epson paper page that they're partnering with Canon in photo papers.Is Canon or Epson going to or have they already provided profiles for Epson papers. If they're out there I can't find them. Looking for profile for Pro-1000...

Sissy by Contributor
  • 2165 Views
  • 3 replies
  • 0 likes

PRO-10S strange banding in shadows only

I have had generally good experience of this printer but have a wicked problem I can't solve.I'm trying to print an image of a church interior which has a section in deep shadow. I'm printing from Lightroom CC Classic (most up to date version) on an ...

Forum.jpg
stex07 by Apprentice
  • 2286 Views
  • 3 replies
  • 0 likes

Resolved! Pro 1000 printing on aluminum panel?

Anyone done this yet? They are 4mm thick so within the thickness guidelines. I'll have to call the panel manufacturer for primer info or to see if I need primer even. Just wondering if anyone has done this and results good or forget it.

Sissy by Contributor
  • 2957 Views
  • 4 replies
  • 0 likes

Resolved! 72 ink cartridges

I have a new Pro 10 printer.  It takes 72 style cartridges.  Eventually I will have to buy new cartridges. On Amazon I see a set of ten cartridges for about $133.  Then I see some individual cartridges for $27 to $29 a piece.  Do the more expensive c...

ceb39usa by Contributor
  • 2170 Views
  • 3 replies
  • 0 likes

Pro-100

When I print on a 8.5 x 11 paper and I put a border on it or I try to print an 8 x 10 photo, one end of it is to the complete edge of the paper and the bottom has an inch or two. So it's cutting off the picture. If I do borderless, it zooms in and cu...

Canon Pixma PRO-1 stripes on the photo

I have a Canon Pixma Pro-1 printer for three years, I print about 100 photos 10 x 15 cm a month. I use only genuine Canon inks.She started printing the stripes on the photo regardless of paper (glossy, matt, satin). The test print is OK, the CD print...

glossy printhead
iweth by Apprentice
  • 2016 Views
  • 1 replies
  • 0 likes

Canon Pixma Pro-100 printing difficulties

Okay so I was just on this forum and corrected my printing issues.I haven't used the printer until this morning, I printed the exact same imageand now instead of it printing dark which was the initial issue... its back to printing dark AND my bright ...

PRO-100 Printer Cover Open

I've read other posts on this subject, but I haven't seen an actual fix for the issue. If I have to send my printer back to Canon, who's paying for the shipping and the repair? 

FSC1968 by Apprentice
  • 2002 Views
  • 2 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements

08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x