Pro-100 colours wrong
My recent prints are coming out wrong. Almost neon in some pointsI have tested the sample image shown here and it’s definitely wrongHave included picsAll the settings look good
My recent prints are coming out wrong. Almost neon in some pointsI have tested the sample image shown here and it’s definitely wrongHave included picsAll the settings look good
Desperate, please help!My printer is flashing 10 times which indicates the output tray is in the paper jam clearing position. The tray is in the correct position and there is no paper jam. This problem has occured twice before in the last couple of...
Good day everyone;I am very pleased to own a canon pixma pro-100, however, after printing about 30 4x6's during christmas, I realize that before the printer spits out the paper, it slides the paper and prints funny at the end of the page. (please see...
OK, was having the cyan nozzle blockage problem so I removed the head and flushed it out and re-installed. Did not clear the problem and now what used to be black on the nozzle check is now clearly cyan and no I didn't switch the carts (impossible I ...
I just purchased a pixma pro 100. I am planning to use it on my Mac running OS Big Sur.I have the Adobe creative suite. What are the best ways to print? Should I do it through those applications? How do I get better profiles, what are the best settin...
I have just set up the printer ann have been printing out the same artwork from illustrator onto different papers. The artwork is bleeding a lot and is not sharp. I read a forum and in system preferences re- installed the driver ( the old one had bon...
Hello, I am getting wrong colors when I do a print with blue in it. The blue colors are coming out as purple! And yet some prints are perfect. I am also getting magenta and grey when trying to print in black and white. Help 1drworx
Hello, I have a new (about two months old) Canon Pixma Pro 100 and I am trying to print some stickers. Previously a few would come out like this, but today it seems like every sheet has almost every sticker with the same issue. Here is an example o...
Finally got Print Studio Pro up and running. Color from prints using PSP match my monitor! Yay! Now I am seeing what looks like an abrasion in one corner of the print. If I go into my printer's settings I see a setting to reduce abrasion. Do I also n...
My Proi100 is not printing dull colors, as with other complaints, it is printing all wrong colors! i.e. a black and white photo prints with the top half green! I've tried nozzle clenaing, deep cleaning and every other option on the utility menu to ...
Black lines keep coming up in my photos used to never happen. How to fix...? Anyonw knows ?? Thanks in advance.
Hi guys, Seems like I'm going to get this printer but little bit conserned about its non user raplacable wasting ink pad. Is it possible to in future, replace or clean up this pads and reset any error it may generate? I've heard some folks made this ...
I'm printing on a Canon - Pro 100 printer. My problem is all my photos are either coming back too dark, too light, or faces are too bright. On the laptop that I'm using, all pictures before printing looks great but as soon as I print I'm getting one ...
I desperately need help and I am at my wit's end. I have a Canon Pro 1 printer and recently all B&W prints have come out with a sepia tint. I have installed the latest driver from the Canon website, (16.40.1.0) as well as the latest firmware, (ver ...
Tried my first print on the sample of Premium Matte A, letter sized, defauilted 25mm borders.Black ink bled all over from the dark areas.I printed from PShop, using PShop with ICC set to Canon Premium Matte A. Selected same settings on the P-200 set...
Subject | Author | Posted |
---|---|---|
04-24-2024 07:41 AM | ||
04-17-2024 04:47 PM | ||
04-15-2024 05:25 AM | ||
04-14-2024 07:37 PM | ||
04-11-2024 01:54 PM |
New to the community? Here's some information to help you get acquainted:
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.