05-17-2023 04:05 PM
ink smears and splotches on prints. paper abrasion is on and head height is heighest. printing from manual feed. printing on thick baryta photo paper. tried nozzle cleaning, bottom plate cleaning and roller cleaning.
05-20-2023 03:35 PM
I've had this happen. There is a setting that might help:
Press the HOME button, select Various settings, Device settings, and Print settings, and then set Prevent paper abrasion to ON.
05-31-2023 05:07 PM
As I said in the OP, Prevent Paper Abrasion was on when these results occurred.
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.