cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Pixma Pro-100 paper size

CrusaderDriver
Contributor

Is there anything to prevent the printer from using roll paper for prints 13" x greater than 19"?

12 REPLIES 12

Stephen
Moderator
Moderator

Hi CrusaderDriver!

 

Thanks for posting!

 

So that the Community can help you better, we will need to know Computer Operating System you're using (Windows XP/Vista/7/8 or Mac 10.x), as well as the way you connect to your PIXMA Pro-100 (USB or networked via WiFi or Ethernet).

Any other details you'd like to give will only help the Community better understand your issue!

If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.

Thanks and have a great day!

PC, win 7/64. Should it matter? It's either a printer limitation (given the 9000 could print roll paper, I done think so) or a driver limitation that should be correctible.

The on-screen manual states:

 

Non-standard sizes:

You can print on non-standard size paper within the following ranges.

 rear tray

- Minimum size: 3.50 x 5.00 inches (89.0 x 127.0 mm)

- Maximum size: 12.95 x 26.61 inches (329.0 x 676.0 mm)

 manual feed tray

- Minimum size: 8.00 x 10.00 inches (203.2 x 254.0 mm)

- Maximum size: 14.00 x 23.00 inches (355.6 x 584.2 mm)

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

Thanks, missed that. Interesting that the spec says 13x19

Just measured my PRO-100 manual feed and indeed, it expands to 14 inches, not 13.

 

Good luck, however, buying pre-cut paper in that size!

-----
Nikon cameras and glass; Canon PRO-100 printer.

I found the source in the on screen manual, a bit buried actually.  Also double-checked the specs on Canon's web site where it states the maximum paper size is 13x19.

Ramona
Authority

Hi CrusaderDriver,

 

The printer is not designed to feed roll paper, however, it can feed paper sizes larger than 13" x 19" in the manual feed tray of the printer.  For more information on the paper sizes and types that can be used with the PIXMA PRO-100, please click on the link below:

 

PIXMA PRO-100 Paper Size and Type Recommendations

 

This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

dmhueber
Apprentice

According to a few youtube video you can go up to 14 by 26.  But not with both feeders, and you cannot print to the edge, likley not more 13.5 wide (maybe only 13").   You have to setup a custom paper size and not print without margins.  I thinkt he reason canon does not state this is because who sells 14 by 26 paper (not canon), and it has limiations like feeding one sheet at a time and not printing without borders.  

 

 

 

So is this true -up to 26" by manual feed? 

 

What paper sources are avaialble? I use Moab Baryta, but I doubt it comes in that size.

 

I have some very wide panorama images that would be exllent at or around that size.

 

Got link to the video?

 

Has anyone here printed that size? Any larger?

 

Thanks

Announcements

03/30/2023: New firmware updates are available.

EOS R3 - Version 1.4.0

EOS R5 - Version 1.8.1

EOS 1DX Mark III- Version 1.7.1

Speedlite EL-1 - Version 1.0.2

03/30/2023: Product Advisory for EF50 F1.2 L USM

03/30/2023: Product Advisory for EOS R10


03/28/2023: New firmware version 1.0.3.1 is available for EOS-R5 C
03/14/2023: New firmware version 1.8.1 is available for EOS R6
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.