02-19-2023 01:18 PM
Hi everyone! I have an art convention coming up and want to ensure smooth printing as possible!
I print 11x14 art prints with white borders through the manual tray. I’m not sure if it’s an alignment issue but my prints were always hit or miss in printing, with one side having a larger border than the other. I suspected the paper might be slightly shifted to one side during printing since the print preview was always correct and I use a Paint to give me equal borders. I use the paper sliders and try to be careful with how I put the paper, so I have no idea if it could be something else.
Is there a way to ensure it prints correctly each time? Am I doing something wrong?
Any help would be greatly appreciated, thank you!
Solved! Go to Solution.
02-19-2023 05:02 PM
If you think your paper is shifting you could try a roller cleaning operation.
02-19-2023 05:02 PM
If you think your paper is shifting you could try a roller cleaning operation.
02-20-2023 11:41 PM
Omg thank you so much!! I tried different things and yet the solution was so simple. This has fixed my border issue, thank you so so much I really appreciate it! You really saved me from printing any more mistakes!
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.