12-19-2014 03:24 PM
Hello,
I love the Pixma Pro-100 on most levels compared to my previous R2400! Ink consumption, image quality, etc all are better. The only exceptionis that I could print a 44" banner on the Epson. Is there any way to configure or override the 13x19 maximum print size?
Thanks!
KP
Solved! Go to Solution.
12-21-2014 10:38 AM
Like other Canon printers, the PRO-100 allows you to define custom paper sizes.
Paper Width: 12.95" - After some experimentation, I found that a custom size set to 13" causes a print error. Using 12.95" fixed this. You will notice 16.54 on the width scale. This is a software programing error.
I have found the effective maximum print length is 26". So 12.95 x 26 inches is it. No 44 inches!
12-19-2014 08:49 PM
12-21-2014 10:38 AM
Like other Canon printers, the PRO-100 allows you to define custom paper sizes.
Paper Width: 12.95" - After some experimentation, I found that a custom size set to 13" causes a print error. Using 12.95" fixed this. You will notice 16.54 on the width scale. This is a software programing error.
I have found the effective maximum print length is 26". So 12.95 x 26 inches is it. No 44 inches!
12-21-2014 10:26 PM
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.