01-17-2019 10:34 AM - edited 01-17-2019 07:12 PM
My Pixma Pro-1 printer is printing three faint pink/red bands in the same direction as the printhead. On A4 paper they are at 3/4", 21/4" and 11" from the papers leading edge when printing. I have performed several cleans, nozzle checks and printhead alignments and all come out correctly printed. I have reinstalled the drivers, changed papers, changed cartridges(OEM), changed settings, etc. to no avail. Bands get fainter when print quality is set to high. Any suggestions or is it the dreaded printhead dead/replacement scenario?
Hope somebody can help...
Just discovered the nozzle. Check print has changed. Now half the PC block is missing and half of the Y block is faint. I guess its the dead printhead?
01-18-2019 12:16 PM
Hi Gcom,
There may be a issue with the print head and troubleshooting with our support group will be needed to narrow down the cause of your issues. Please contact our support group at 1-800-OK-CANON (1-800-652-2666), Monday - Friday, 8:00 AM - 8:00 PM EST(excluding holidays).
We look forward to hearing from you.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.