04-19-2015 04:06 PM - edited 04-19-2015 04:09 PM
Have had this printer for about 6 years. Always worked fine until now.
Colors are not vivid at all..dull..All settings the same prior to problem. Maintenance checks AOK, Paper profile same..different image prints same. My 9000 II prints it exactly as should and exactly as 9500 II did prior to fault.
Ps manages color, Relative colormetric..
Reloaded drivers twice.
Any comments on what might be wrong?
Also my 1st post here, so can you upload images for people to compare?
Dan
Solved! Go to Solution.
04-20-2015 01:58 PM
Solution....printer driver was NOT installed correctly. I was not getting proper workflow from Canon Download and Install on installation. Called Canon and TS got me a new link for the drivers and Voila!!
Works fine....
Dan
04-19-2015 09:37 PM
04-20-2015 09:09 AM
Thanks John..This would not be the first time that the printer gave me a false ink reading BUT as I stated, I replaced all the ink cartdg. per my initial problem.
But I will try again...thanks for your response!
Dan
04-20-2015 09:49 AM
Was not that John..Thanks!
Dan
04-20-2015 01:58 PM
Solution....printer driver was NOT installed correctly. I was not getting proper workflow from Canon Download and Install on installation. Called Canon and TS got me a new link for the drivers and Voila!!
Works fine....
Dan
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.