Showing results for 
Show  only  | Search instead for 
Did you mean: 

P1000 not producing proper image size print that was defined by Photoshop. Image is set at 11 x`14.


In Photshop my image is adjusted to be at 11x14. When I click on print I get the drop down menu to choose that size on printer. When I select the 11x14 the dimensions on the PS box reverts back to its original saller dimensions. the print then comes as the origianl smaller size. How do I set the operation up to produce the desired image




Which version of Windows or macOS are you using?
Are you wired or using WiFi or AirPrint?

Are the most up-to-date software and drivers from the Canon site installed? If not, get them HERE.

Please let us know if there is anything else you can think of that might help the community with your question!


using Windows 11. Software and drivewrs are always up to date and just for the possilblity it was note, I re-installed the recents downloads from Cano website. Still did not work. Resorted to using plug-in 'Professional Print & Layout' as a stand-alone. But would rather be able to do my prints directly from PS


"But would rather be able to do my prints directly from PS"


Me too! I always print directly from PS or LR. However, in PS there are two places where you need to check image size. If you ar printing an 11x14" I suspect you are using 11x17" paper?

First select borderless in the print menu. When you click print in PS check out this screen carefully.

print setting.jpg

Although the image size is 11x14" you see PS has reduced it. Simply change that to 11x14". Keep in mind the printer needs a bleed area. Not all sizes are available with certain paper sizes.

EOS 1DX and 1D Mk IV and several lenses!

Mucho Thanks

Will givbe it a shot and let you know


03/30/2023: New firmware updates are available.

EOS R3 - Version 1.4.0

EOS R5 - Version 1.8.1

EOS 1DX Mark III- Version 1.7.1

Speedlite EL-1 - Version 1.0.2

03/30/2023: Product Advisory for EF50 F1.2 L USM

03/30/2023: Product Advisory for EOS R10

03/28/2023: New firmware version is available for EOS-R5 C
03/14/2023: New firmware version 1.8.1 is available for EOS R6
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.