cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Issues printing 5x7s with Canon Pro-1000

blackbranches
Apprentice

hi !

I've had a Canon pro-1000 for the last few years, and it has been a mostly beautiful experience... except for 5x7 prints, such as the attached. Looking to figure out what could be done with this issue, thanks !

Printing from Adobe Photoshop CC on Mac OS X 10.12.6, using Moab Lasal paper with matching profile for pro-1000

print 1.jpegIMG_7096.jpg

3 REPLIES 3

ebiggs1
Legend

"...except for 5x7 prints, such as the attached."

Is it just that one or all 5x7's? If it is all, I suggest you check your print driver because Mac OS needs a specific one. Make sure you have the correct one. I am not a Mac guy so I can't help there is that is the case.

EB
EOS 1DX and 1D Mk IV and several lenses!

it's all 5x7's : /  I'm using the driver provided specifically by Moab for the paper / printer combo.. it seems to happen on other 5x7 papers I am using, too, but not on other sizes (I often work with 8.5x11 & 13x19, with no issues at all)

ebiggs1
Legend

Again,  I am not a Mac guy so I can't help there is that is the case but I suspect it is because of that certain print driver. You need to call Canon support 1 (800) 652-2666. They can tell you what is what and if it is compatible with Moab. It may not be.

EB
EOS 1DX and 1D Mk IV and several lenses!
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.