03-22-2023 02:08 PM
I'm printing on Red River card stock, 60lb Pecos River Gloss, 7x10 Greeting Cards. Paper is loaded in portrait orientation. Driver version is 184.108.40.206. Document is created in Apple Pages.
I've printed cards in this exact configuration just a few days before. I don't know what has changed, but now it refuses to print this type of document, and I am completely unable to resolve this error. I've tried various "media types" for glossy photo paper from the Printer Options dialog and all give the same error.
The custom size is set up properly, selected, and as previously mentioned, has printed fine before.
I've deleted the printer in Settings and re-installed it twice. I've installed the generic driver and the Canon ij driver, each gives the same error. I don't know what else to do to get this printer to work again.
I can print 8.5x11 plain paper, so the computer is talking to the printer.
For now I'm using my Epson PM-400, printing 5x5 cards because at least that works. Reliably. Every. Single. Time.
Appreciate any insight.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 220.127.116.11
PowerShot SX420 IS - Version 18.104.22.168
PowerShot 620 HS - Version 22.214.171.124
PowerShot SX720 HS - Version 126.96.36.199
PowerShot G1X Mark III - Version 188.8.131.52
PowerShot G7X Mark II - Version 184.108.40.206
PowerShot G9X Mark II - Version 220.127.116.11
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.