11-29-2019 06:40 PM
I'm trying to print a 13x25.5 print on matt paper. Lightroom shows my cell size as12.72x25.40. I keep getting a message that the media type or paper size are not set correctly. What am I doing wrong
11-29-2019 10:41 PM
11-30-2019 02:10 PM
I can't figure out how to post the setup page but Ive got custom setting with 13in. width and 26 in. height printing in portrait orientation
11-30-2019 09:36 AM
Greetings,
Pro 100 max print size is 13 x 19
Paper Sizes 4 x 6, 5 x 7, 8 x 10, Letter, Legal, 11 x 17, 13 x 19
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, ~RF 200-800 +RF 1.4x TC, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8 ~CarePaks Are Worth It
11-30-2019 02:14 PM
Yes those are the normal sizes however it is capable of printing as a custom paper size of 13 x 26+. For some reason Canon restricts the Pro 100 to 26+ inches long my previous Epson could print to 38 inches and beyond. Why Canon has this restriction I'll never know.
11-30-2019 10:40 AM
Are you selecting Custom print size in the driver?
11-30-2019 02:04 PM
yes, I have selected custom under preferences and set it for 13,00 inches x 26 inches. When I hit print it sends the message the media type and paper size are not set correct. Click cancel printing, change the media type or paper sizesetting and print again. I'm using Lioghtroom classic and used page setup in Lightroom. The crazy thing is I had this happen before trying to print this size but eventually was able to print. I can seem to find the answer after two days of trying.
01-26-2020 01:32 AM
I had the same problem. You must show the width as 12.75 to get it to print
01-26-2020 01:09 PM
I spec'd the heighth to 12.95. Worked like a charm! Beautiful print first time. It helped to have a compoiste HDR pano. I'll shoot 10+ frames, auto stitch in PShop. I also bracket to make the HDR composite. One file is 600mb. Tack sharp!
Some have expressed a desire to go wider than 26", but 13x26 is as odd an aspect ratio as I would want. Goes into a standard 20x30' frame. Thank you Canon -and the forum experts here!
11-30-2019 02:16 PM
My page setup looks exactly like the one you posted Jr. Hoffman
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.