02-20-2025
05:27 PM
- last edited on
02-20-2025
10:52 PM
by
StevenMOD
Is there an auto cleaning setting on this printer? It seems to shut down if left on for a while. Does it turn on and do auto head cleaning at a set time if not in use?
Solved! Go to Solution.
02-24-2025 04:10 PM
Hi JeremiahJohnson,
Because this issue is hardware related, it is recommended that you contact technical support via phone for further assistance. There is NO charge for this call. Please dial 1-800-423-2366, Monday-Friday 8:00 am to 6:00 pm Eastern Time, excluding holidays. A Technical Support Representative can provide this information to you via phone.
Did this answer your question? If so, please click the Accept as Solution button below so that others may find the answer as well.
02-24-2025 04:10 PM
Hi JeremiahJohnson,
Because this issue is hardware related, it is recommended that you contact technical support via phone for further assistance. There is NO charge for this call. Please dial 1-800-423-2366, Monday-Friday 8:00 am to 6:00 pm Eastern Time, excluding holidays. A Technical Support Representative can provide this information to you via phone.
Did this answer your question? If so, please click the Accept as Solution button below so that others may find the answer as well.
02-28-2025 09:44 AM
Ok after calling, they said yes, the Image Prograf TM-350 is self cleaning, I guess it does it every 4 hours, the machine turns on to do it. I assume it's that slight sound that happens inside the printer when you first wake it up. It's very quiet. Other larger printers are pretty alerting when they self clean. A way to check that it is self cleaning could be to take a look at the waste tray, if there are starting to be little flecks in it without use, then it's cleaning.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.