cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

drivers for ImageClass MF4770n

Trader86
Apprentice

I lost all drivers during reinstallation of Windows 10.  I tried downloading them again, but I still can't print (using my computer).  I kept the USB connector attached & the computer was on during downloading--did that foul things up?

Please help.

1 ACCEPTED SOLUTION

Accepted Solutions

Hector
Product Expert
Product Expert

Hello Trader86,

If the printer was connected while the drivers were not installed, it can cause an issue with the setup. 

  1. You can press the Windows key and the letter R key at the same time on your keyboard. In the run box that appears, you can type in devmgmt.msc and click OK.
  2. In the window that comes up, you can click on the option for universal serial bus controllers at the bottom.
  3. You can right click on any options for USB printing support and then select uninstall device.
  4. Once they are gone, you can disconnect the printer from the computer.
  5. Once disconnected, you can restart the setup for the imageCLASS MF4770n MFDrivers and wait for the setup to prompt the USB cable connection before connecting.

If you continue to have issues after the reinstall, I would suggest contacting support at 1-800-652-2666 for further assistance.

 

View solution in original post

3 REPLIES 3

Hector
Product Expert
Product Expert

Hello Trader86,

If the printer was connected while the drivers were not installed, it can cause an issue with the setup. 

  1. You can press the Windows key and the letter R key at the same time on your keyboard. In the run box that appears, you can type in devmgmt.msc and click OK.
  2. In the window that comes up, you can click on the option for universal serial bus controllers at the bottom.
  3. You can right click on any options for USB printing support and then select uninstall device.
  4. Once they are gone, you can disconnect the printer from the computer.
  5. Once disconnected, you can restart the setup for the imageCLASS MF4770n MFDrivers and wait for the setup to prompt the USB cable connection before connecting.

If you continue to have issues after the reinstall, I would suggest contacting support at 1-800-652-2666 for further assistance.

 

Before you replied, I uninstalled all Canon-related files with Revo Uninstaller software.  Then I downloaded all Canon drivers (including the patch) with the computer USB cable disconnected from the printer.  After connecting printer & computer via the USB connector, the scanner worked like a charm. This printer is actually terrific.  I find it hard to imagine that the newer products are substantially better than this model.

Hello Hector, I hope you are still around. I have the same issue as Trader86, and I followed your clear instructions, but my Windows11 computer says no driver is available, after disconnecting the USB cable and reinstalling the driver per your instructions.. The website says the driver is compatible with Windows11. Unfortunately, support is no longer available for this printer. I'd appreciate any guidance you can give me.

Thanks,

Allen

Holiday
Announcements

12/18/2025: New firmware updates are available.

EOS C400 - Version 1.0.4.1

EOS C80 - Version 1.0.4.1

XF605 - Version 1.0.7.1


12/15/2025: New firmware update available for EOS C50 - Version 1.0.1.1

11/20/2025: New firmware updates are available.

EOS R6 Mark III - Version 1.0.1

EOS R3 - Version 2.0.0

EOS R1 - Version 1.2.0

EOS R5 Mark II - Version 1.2.0

EOS R5 - Version 2.2.1

PowerShot G7 X Mark III - Version 1.4.0

PowerShot SX740 HS - Version 1.0.2


10/21/2025: Service Notice: To Users of the Compact Digital Camera PowerShot V1

10/15/2025: New firmware updates are available.

Speedlite EL-5 - Version 1.2.0

Speedlite EL-1 - Version 1.1.0

Speedlite Transmitter ST-E10 - Version 1.2.0


07/28/2025: Notice of Free Repair Service for the Mirrorless Camera EOS R50 (Black)

7/17/2025: New firmware updates are available.

EOS R7 - Version 1.7.1

EOS R10 - Version 1.7.0

EOS R8 - Version 1.5.0

EOS R50 - Version 1.4.0

Powershot V10 - Version 1.4.0

Powershot V1 - Version 1.1.0

EOS R50V - Version 1.1.1


05/21/2025: New firmware update available for EOS C500 Mark II - Version 1.1.5.1

02/20/2025: New firmware updates are available.

RF70-200mm F2.8 L IS USM Z - Version 1.0.6

RF24-105mm F2.8 L IS USM Z - Version 1.0.9

RF100-300mm F2.8 L IS USM - Version 1.0.8

RF50mm F1.4 L VCM - Version 1.0.2

RF24mm F1.4 L VCM - Version 1.0.3


01/22/2024: Canon Supports Disaster Relief Efforts in California
01/14/2025: Steps to resolve still image problem when using certain SanDisk SD cards with the Canon EOS R5 Mark II