cancel
Showing results for 
Search instead for 
Did you mean: 

MB2720 changed from network to USB, cannot scan from panel

caschryver
Apprentice

I just removed the device from the network.  Plugged in a USB cable.  PC can print just fine.  However, I cannot scan.  Attempting to scan from the panel yields nothing, no messages at all.  The IJ Scan Utility will only show the old network device.  How do I tell the device and/or the software that the connection has changed?

1 REPLY 1

ArthurJ
Product Expert
Product Expert

Hi,

I recommend unplugging the usb cord from the computer and then remove the printer/scanner driver from your computer. Once that is done, reinstall the Canon printer/scanner driver from the Canon website and select usb during the driver install. During the install, you will be asked to connect the printer usb cord and the install will complete. 

Once that is done, open IJ Scan Utility and it should now show you printer as MB2700 series without network attached to it. 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Announcements

08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x