cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

IJ Utility Quick Menu Not Available

COUNTRYARTIST
Apprentice

Can't find the option to install QUICK MENU to my task bar after an OS reinstall. Printer (MX922) works. Scanner works. QUICK MENU option not available (and nothing to RIGHT CLICK) when I go to PROGRAMS > CANON UTILITIES >  IJ UTILITY 

Thanks for help.

5 REPLIES 5

Danny
Moderator
Moderator

Hi, COUNTRYARTIST!

So that the Community can help you better, we need to know exactly which operating system is running on your computer (i.e. Windows or macOS, and which version thereof). That, and any other details you'd like to give will help the Community better understand your issue!

If this is a time-sensitive matter, click HERE search our knowledge base or find additional support options HERE.

Thanks and have a great day!

Thanks.

My PC is running Windows 10 PRO. OS build: 19044.2006. Experience: Windows Feature Experience Pack 120.2212.4180.0.

NAVIDIA GeForce GTX 1650

Version 21H264bit

The only thing that changed from when QUICK MENU was available and being used is that the OS was upgraded from Windows 10 Home to PRO.

COUNTRYARTIST
Apprentice

Could it be that QUICK MENU is a separate download? If so... where do I get it?

Hi COUNTRYARTIST,

You are correct, downloading and installing the Quick Menu should resolve this issue.  Please follow these steps to download and install the Quick Menu on your computer:

1. Please use the following link:

https://www.usa.canon.com/support/p/pixma-mx920/mx922

2. Click Downloads at the top.

3. Click on Software & Downloads.

4. Click the Download button to the right of "Quick Menu Ver.2.8.5 (Windows)". If you do not see it in the list, scrolll to the bottom of the list and click the Load More box.

5. Once the download is complete, open your downloads folder. To access this, press CTRL and J, then let both go.

6. Double click "qm__-win-2_8_5-ea31_2.exe" to begin the installation.

7. Follow the on screen prompts to install.

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Downloaded and setup. Thanks much.

There was an option in the QUICK MENU for DEEP CLEANING that I used to use to get my printer back to working. I don't see that link in this new installation. I find a list of articles ... but no link to select.

I did ink cartridge cleaning by hand. That worked for a while. But it wasn't until I clicked on the DEEP CLEANING option in the QUICK MENU and let the machine clean itself that the unity returned to normal and dependable use.

I'm probably overlooking something. Old man here would welcome help from you smart people.

Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!