12-13-2013 09:18 AM
I just bought and set up my new MX922, and read that the Ethernet and wireless connections could not be used at the same time. I'm not entirely sure what that means.
Does it mean that if wireless is set up, and I plug in a cable, neither will work? They wont print at EXACTLY the same time?
I have an Airport Extreme with a spare ethernet port, so attatching to that is what I would like to do, but I also print occassionally from my MacBook Pro - so the wireless would be handy.
Any pointers would be greatly appreciated.
01-11-2014 11:35 AM
The printer will only allow one of the connections to be enabled at a time, so you can activate the Wireless LAN or the Wired LAN connection. Either connection will allow you to print to your devices regardless of how they are connected to your network.
04-29-2017 01:13 PM - last edited on 04-29-2017 03:11 PM by Stephen
This is so ***!! I have several PC's but not all of them are wireless...
04-29-2017 03:14 PM
Once your printer is connected to your home, private network, it should be discoverable by all of the devices on your network, whether your device (or the printer) is wired or wireless shouldn't matter. Using the Canon software will help make this easier, and can be downloaded HERE. If you need assistance, don't hesitate to reach out to our US-based support team at 1-800-OK-CANON (800-652-2666) during the week.
04-29-2017 03:46 PM
Would be nice but I have the wireless router and a wired lan on two different networks... so it wont work for me
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 220.127.116.11
PowerShot SX420 IS - Version 18.104.22.168
PowerShot 620 HS - Version 22.214.171.124
PowerShot SX720 HS - Version 126.96.36.199
PowerShot G1X Mark III - Version 188.8.131.52
PowerShot G7X Mark II - Version 184.108.40.206
PowerShot G9X Mark II - Version 220.127.116.11
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.