09-24-2021 04:24 PM
I've been trying to solve this problem...wow Canon, seems like a tremendously common issue! I'm using a mac & the printer is connected to my WiFi...I set it up and the 1st time it prints fine. Then...the printer becomes unavalble shortly thereafter.
I have to power it down, restart, and wait for the connection with each job I'm trying to print. I've used the specific driver and I've also used Airprint -happens with both methods.
Anyone solve this?
Thx
09-25-2021 07:13 PM
This was happening with both of my Canon printers. One thing that helped a lot was to configure my home's router. I assigned a persistent IP address to each printer. Without this setting, the router did not always assign the same IP address. Hopefully your router is more sophisticated and does this automatically, but mine for some reason was not, even though it's a year 2020 model. This kind of configuration is beyond what most people understand or care to do, so I'm sorry if this doesn't make sense. But it helped to resolve the issue for me. Another thing which helped was to move the printer closer to the WiFi antenna. Many printers, not just Canon's seem to give people these problems, and I wish Canon especially would work harder to improve our experience.
12-16-2021 04:34 PM
Hello Skbvib,
The issue that you are describing could be caused by the driver that it used by the Mac or it could be caused by network communications issues. The feature that changes the addresses on your network is called DHCP and it could cause issues with the Mac finding the printer over the network. It would be the issue that DudShan is referring to and can be changed in the settings for your specific router.
We would be happy to assist further with the issue. To provide some feedback or some troubleshooting steps, we would need some additional information. If you could reply to this message with the information below, we can provide some assistance. For a more immediate resolution, feel free to contact our support team at 1-800-652-2666. Our agents would be happy to help.
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.