12-05-2023
10:39 AM
- last edited on
12-05-2023
10:46 AM
by
Danny
Has anyone else had an issue with the sound settings on the G7x mkiii reverting back to auto after turning the camera off and back on. I’ve set and saved the settings multiple times and it’s frustrating to have to go in and set my mic up every time I turn the camera on. Any help is greatly appreciated.
Solved! Go to Solution.
12-08-2023 08:26 AM
Thanks for your input. My mic setup was still plugged in. I took the battery out without powering the camera off and it started working as it should again.
12-07-2023 06:01 PM
Hello Haledamage,
If you are using an external microphone, once the camera is powered off and the mic disconnected, the settings will revert to using the internal microphone. You can save commonly used shooting modes and configured settings for reuse using the custom shooting mode (C mode). This can be setup in the Tools (yellow wrench) menu #5. You can follow the steps for this starting on page 286 in the user's manual. I have attached a link to the manual HERE for your reference.
12-08-2023 08:26 AM
Thanks for your input. My mic setup was still plugged in. I took the battery out without powering the camera off and it started working as it should again.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.