12-27-2019 08:44 AM
How do I turn off the "feature"? I don't want the focus frame moving to where I touch the screen. I want it centered on the LCD screen almost all of the time.
12-27-2019 07:00 PM
Hello nokudzo,
In order to prevent this from occurring you can set the touch ccontrols to Off. Go into the Menu and to the wrench menu and set touch control to disable.
12-27-2019 11:08 PM
Thanks, but ... I don't want to lose touch control for other/all functions shown on the screen, those are fine. I just want the focus frame to stay put.
any other suggestions?
12-29-2019 01:12 AM
Hi nokudzu,
When shooting with the LCD screen, look for an icon on the bottom left of the screen. Tap it to make sure that it is set to off.
To lock the autofocus, press shutter halfway down then press the left button on the back of the camera. That should lock the autofocus.
12-29-2019 06:06 PM
Thanks, but ... I don't want the focus point rectangle on the LCD screen of the camera to move when I touch the screen. I already had touch for shutter already off.
12-29-2019 07:44 PM
@nokudzu wrote:Thanks, but ... I don't want the focus point rectangle on the LCD screen of the camera to move when I touch the screen. I already had touch for shutter already off.
Disable the touch function in the screen entirely. Or, switch the camera the camera to MF mode, which disables AF mode.
04-27-2020 07:32 PM
I talked to Canon several months ago regarding the same issue. They suggested the same idiotic solution to me. I tried to explain as you have. They didn't get it. They're not paid to get it. It's one of several really blatantly design errors in the camera.
04-27-2020 07:50 PM
Yes, I was very disappointed with their non-answer. I just have to remember to always tap the center of the screen to be sure the focus point is somewhere close to the center. I'm sure this could be solved with a software upgrade. But they don't seem to be interested. I am not pleased. That's too bad, because I like the camera overall. It's a nice "grab a camera" when I don't want to lug around my regular gear.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.