08-03-2020 09:37 PM
My ELPH 180 no longer connects to Windows 10 computers. I've tried multiple computers and multiple USB cables with no luck. I've gone through all the FAQs and have had no success with them. I realize this problem has been posted before but no solution has been posted which matches what I'm seeing. The computers provide a USB-connected confirmation tone when the camera is plugged in but in less than 3 seconds a USB-disconnected tone rings. I've tried this with Device Manager open and "Portable Devices" appears with the tone and then disappears. The same behavior happens accross all computers and cable configurations - the only constant is the camera itself. It was purchased new in May 2020 so it's a young device. I tried installing Canon CameraWindow but that didn't help either.
08-04-2020 05:25 AM
Welcome to the forum.
Try resetting camera settings - page 74 of your user manual.
08-04-2020 06:33 PM
Thanks for the reply but, sadly, didn't work. Still the same problem.
08-04-2020 07:08 PM
Give Canon a call at 1-800-OK-CANON
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 22.214.171.124
PowerShot SX420 IS - Version 126.96.36.199
PowerShot 620 HS - Version 188.8.131.52
PowerShot SX720 HS - Version 184.108.40.206
PowerShot G1X Mark III - Version 220.127.116.11
PowerShot G7X Mark II - Version 18.104.22.168
PowerShot G9X Mark II - Version 22.214.171.124
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.