05-06-2023 11:53 AM
Before I got my Imageclass MF453dw, I had a PixmaMG7500. That inkjet had a setting to automatically turn off after 15 minutes. If I sent something to it to print and it was OFF, it would turn itself on and print. It was very convenient.
I would like to know if my new laser printer has settings that I can adjust to make it do the same thing.
Many thanks for any advice you can offer.
Solved! Go to Solution.
05-06-2023 07:03 PM
I found the User Guide for the printer online, but I didn't scan through the ToC. Here is the link:
https://www.manua.ls/canon/imageclass-mf453dw/manual
If there is a sleep timer, it should be covered. I believe that my 743Cdw does have such a timer.
05-06-2023 07:03 PM
I found the User Guide for the printer online, but I didn't scan through the ToC. Here is the link:
https://www.manua.ls/canon/imageclass-mf453dw/manual
If there is a sleep timer, it should be covered. I believe that my 743Cdw does have such a timer.
05-07-2023 06:56 AM
Thank you very much. Finding the part referencing the sleep timer was the hardest part (pgs 179 & 462). I have it set now.
05-07-2023 05:56 PM
Thank you for posting the results! 🙂
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.