imageCLASS MF453dw ADF front panel 2 sided option missing

[pickleball]

imageCLASS MF453dw with updated firmware as of 3/2/26, on its front panel does not show an option to scan from its automatic document feeder ADF as 2 sided or duplex. It does scan one side. Windows 11 scan software does show a checkbox for 2 sided scanning and when enabled on the computer, the ADF does scan 2 sides. But even then, scanning using the scanner's front panel only scans one side.

[shadowsports]

Greetings,

Please revisit the LCD screen.  Select the Send Settings menu tab.  Scroll down and look for 2-Sided original.  Change from off to on.

[pickleball]

I do not see a Send Settings under the menu tab. There is Menu>Function Settings>Send>Scan and Send Settings but no 2-sided original parameter there. 
I am actually not ‘sending’ the scan to a remote computer but generally just want to save (send?) to USB.

For Copy, there are a variety of 2-sided options on the lcd screen.

Steve

[shadowsports · Accepted solution]

Greetings, 

It's the same, but if you'd like to save to USB..

Insert your pen drive, Select Scan, Select USB Memory, Scroll down and select 2 sided (on), then Start (color or B&W).

Sorry for the poor image quality.  

 

[pickleball]

Oh wow! Now I do notice a thin narrow scroll bar on the far right edge that disappears after 3 seconds. So it may not be noticed, so you aren’t aware there are other parameters available. 
Guess I need to start trying to scroll on every menu to see if other settings are available elsewhere as well. 
Thanks for the reply.

Steve

[shadowsports]

Careful when flicking that scroll bar with your finger.  I almost always turn something on by mistake.  🤣

The entire screen is capacitive touch screen so you can touch and flick almost anywhere.

After a while you'll get used to it.  😉