05-07-2022 10:57 PM - last edited on 12-06-2022 12:38 PM by Danny
MF733Cdw my scanner autofeed jammed, after I cleared the jam, the auto feed never worked again.
How can I clear this problem. I can still scan on the glass but I really need to do double sides auto feed scanning.
05-18-2022 04:05 PM
In this situation, you can try opening the feeder cover using the steps in the link HERE and checking for any obstructions. We would be happy to assist with the issue. To provide some feedback or some troubleshooting steps, we would need some additional information. If you could reply to this message with the information below, we can provide some assistance.
12-06-2022 12:28 PM
Paper jams on right side of paper. Paper does not rip
12-16-2022 02:48 PM
If the paper jams on a specific side, it will usually point to something in the paper feed path. In this situation you can try opening the feeder path using the steps in the link HERE Once the cover for the feeder path is open, you can try inserting some stiffer paper into the paths the paper feeds into or using some compressed air to try and clear out any obstructions.
If that does not resolve the issue, it looks like the printer needs service. you can use the link HERE to access your My Canon account and check your service options.
12-16-2022 03:54 PM
Thanks. Does not seem to be any obstruction but I will try compressed air and stiffer paper.
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.