cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

imageCLASS MF642Cdw Your printer needs attention/ Printer toner error?

mohamed7
Contributor

Hi all,

we are using canon mf642c ink jet printer in our office. 

The printer is out of toner ink but stills printing for couple of users but one of the user is receiving error on his laptop and not able to print as in the attached image.

can we bypass this error and print like other users doing?

mohamed7_0-1722843352681.png

thanks in advance

1 ACCEPTED SOLUTION

shadowsports
Legend
Legend

Greetings,

Like a low fuel warning in your car, the printer is telling you it needs toner.  The printer will eventually stop printing for everyone.  You may do as you wish, but using the printer until it doesn't have any toner left (at all) is not recommended. The warning is there to tell you its time for new toner, not to run it 100% down until it quits.  The printer is not designed to continue printing with empty toners installed.  To prolong its life, I suggest you replace what's low sooner rather than later.     

~Rick
Bay Area - CA


~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, ~RF 200-800 +RF 1.4x TC, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8 ~CarePaks Are Worth It

View solution in original post

4 REPLIES 4

shadowsports
Legend
Legend

Greetings,

The MF642Cdw is a laser printer. It uses toner. It is not classified as an inkjet.

The issue is exactly what you describe, the printer is out of toner.  Tap the consumables icon on the LCD screen.  It will show you it's toner levels.  Replace the one(s) that are low or empty.

 

~Rick
Bay Area - CA


~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, ~RF 200-800 +RF 1.4x TC, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8 ~CarePaks Are Worth It

thank you for your response.

since other users are printing without any issue, can the affected user have to configure any setting to print just like others??

shadowsports
Legend
Legend

Greetings,

Like a low fuel warning in your car, the printer is telling you it needs toner.  The printer will eventually stop printing for everyone.  You may do as you wish, but using the printer until it doesn't have any toner left (at all) is not recommended. The warning is there to tell you its time for new toner, not to run it 100% down until it quits.  The printer is not designed to continue printing with empty toners installed.  To prolong its life, I suggest you replace what's low sooner rather than later.     

~Rick
Bay Area - CA


~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, ~RF 200-800 +RF 1.4x TC, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8 ~CarePaks Are Worth It

thank you for your valuable comments

Avatar
Announcements