08-05-2024 03:36 AM - last edited on 08-06-2024 10:32 AM by Danny
Hi all,
we are using canon mf642c ink jet printer in our office.
The printer is out of toner ink but stills printing for couple of users but one of the user is receiving error on his laptop and not able to print as in the attached image.
can we bypass this error and print like other users doing?
thanks in advance
Solved! Go to Solution.
08-05-2024 09:58 AM
Greetings,
Like a low fuel warning in your car, the printer is telling you it needs toner. The printer will eventually stop printing for everyone. You may do as you wish, but using the printer until it doesn't have any toner left (at all) is not recommended. The warning is there to tell you its time for new toner, not to run it 100% down until it quits. The printer is not designed to continue printing with empty toners installed. To prolong its life, I suggest you replace what's low sooner rather than later.
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
08-05-2024 08:39 AM
Greetings,
The MF642Cdw is a laser printer. It uses toner. It is not classified as an inkjet.
The issue is exactly what you describe, the printer is out of toner. Tap the consumables icon on the LCD screen. It will show you it's toner levels. Replace the one(s) that are low or empty.
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
08-05-2024 09:04 AM
thank you for your response.
since other users are printing without any issue, can the affected user have to configure any setting to print just like others??
08-05-2024 09:58 AM
Greetings,
Like a low fuel warning in your car, the printer is telling you it needs toner. The printer will eventually stop printing for everyone. You may do as you wish, but using the printer until it doesn't have any toner left (at all) is not recommended. The warning is there to tell you its time for new toner, not to run it 100% down until it quits. The printer is not designed to continue printing with empty toners installed. To prolong its life, I suggest you replace what's low sooner rather than later.
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
08-05-2024 10:01 AM
thank you for your valuable comments
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.