03-27-2015 02:50 PM
04-02-2015 06:37 PM
I have an MF8050 and did a search on Utube. I found a video for a similar HP machine and there was a combination of pushing the stop button and the on button to rotate the shaft. I am on this forum looking for a similar combination for my Canon.
04-02-2015 06:41 PM
04-04-2015 03:47 PM
Chowda76--I asked Canon support for the method of accessing the service mode menu and was told they are not given to the end user/consumer. I also purchased the manual and it would be a lot easier if Canon would recognize that the service mode menu should not be top secret.
It does occur to me the codes to access the service mode must be somewhere on the machine. A regular service technician is not going to know all of the codes for all of the models of machines that are sold.
Good luck.
04-04-2015 05:38 PM
Chowda76--Now I understand what you mean about menu,2,8,menu. I have access to Service Mode. Thanks.
04-02-2015 06:47 PM
Hi Chowda76!
So that the Community can help you better, we will need to know what model printer you are working with.
Any other details you'd like to give will only help the Community better understand your issue!
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.
Thanks and have a great day!
04-04-2015 06:18 PM
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.