10-11-2017 05:30 PM - edited 10-12-2017 11:49 AM
Printing from MS-Word on a Mac to a MF733Cdw. The MS-Word document has "continuous" section breaks in order to go from portrait to landscape, or back, without a change in pagination. But the printer seems unable to duplex print any two pages with a section break in between, even if it's a continuous section break, i.e., there's no "page break".
Is there any way to program the printer to ignore the section breaks and continue duplex printing?
Solved! Go to Solution.
10-26-2017 02:39 PM
Thanks. Problem appears to be with the OS X operating system rather than the printer.
10-26-2017 11:57 AM
Hi spanman,
Based on the spefic issue, It is recommended that you contact one of Canon's Technical Support Representatives. To contact a Technical Support Representative, please use the link below:
http://Canon.us/ContactLI
10-26-2017 02:39 PM
Thanks. Problem appears to be with the OS X operating system rather than the printer.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.