09-07-2022 03:11 PM - edited 09-07-2022 03:17 PM
I have everything correctly set up in Word to print but when I print, nothing comes out on the envelopes. I recently printed a batch of envelopes successfully and appeared to follow the same path with the latest batch of envelopes but with a different result, unfortunately.
Solved! Go to Solution.
09-21-2022 02:00 PM
Hi Hector,
I was able to resolve the issue by changing a print setting in the Printer Properties section. On the Basic Setting tab in Printer Properties, I needed to change the orientation to Landscape from Portrait. That was it!
Joe
09-21-2022 01:32 PM
Hello HomesByJoe,
We would be happy to assist with the issue. To provide some feedback or some troubleshooting steps, we would need some additional information. If you could reply to this message with the information below, we can provide some assistance.
09-21-2022 02:00 PM
Hi Hector,
I was able to resolve the issue by changing a print setting in the Printer Properties section. On the Basic Setting tab in Printer Properties, I needed to change the orientation to Landscape from Portrait. That was it!
Joe
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.