07-30-2019 12:10 PM
I set my MB2720 printer to turn off automatically after 15 minutes of idle time, however, it is not turning off. What could be the problem?
07-31-2019 12:21 PM
Hi bobandmyle,
Please make sure that the setting is set correctly on the printer itself. To do this, please follow these steps:
1. Turn your MAXIFY MB2720 on.
2. Swipe the Home screen and select Eco Settings.
3. Select Power Control.
4. Select Enable auto power control.
5. If the "Set the function that..." message appears, select Next.
6. Select the desired settings.
7. Select OK.
For more information regarding this, please use the following link to the MAXIFY MB2720's On Line Manual from Canon's web site:
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.