11-02-2019 12:24 PM
I have a new MF743cdw on an iMAC and it seems to be just a bit light when printing, I need to know how to set it to always print a bit darker, can anyone offer any suggestions?
11-04-2019 10:25 AM
Hi djwoodyard.
In the print dialog box, there should be a drop-down box under Orientation:
Select [Basic], and from there you will be able to adjust various quality settings. Please click the link below for more information on the settings that can be changed:
Mac Driver Settings - Basic Panel
If you have any further questions, or run into any issues, please call us at 1-800-OK-CANON (652-2666), Monday - Friday 10:00 a.m. to 6:30 p.m. ET (excluding holidays).
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.