01-03-2021 03:56 AM
The printers intial common calibration was set up using the supplied pack of Canon HW Coated HG paper.
Moab Paper Co and ColorByte has recently advised that the internal calibration for the Pro Series should be done using Canon Glossy Photo Photographic Paper, rather than HG paper.
Apparently this notification came direct from Canon, although it would appear this hasn't been passed down to owners of these printers.
If anyone can throw more light on this I would be grateful.
Thanks.
-David
02-19-2021 01:06 PM
Hi DBPAU,
It is recommended that you contact Canon's Contact Center to speak with a Technical Support Representative for further assistance. There is NO charge for this call. Please dial 1-800-423-2366, Monday-Friday 8:00 am to 8:00 pm Eastern Time, excluding holidays.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.