cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

How to reset Manager ID/PIN on imageCLASS MF6160dw?

rkon
Apprentice

I don't remember what I set my manager ID and PIN to on my printer; how do I reset them (or factory reset the whole printer if that's what's required)?

 

It is an imageCLASS MF6160dw

 

Thanks

1 ACCEPTED SOLUTION

James_C
Moderator
Moderator

Hi rkon,

 

The factory default System Manager ID and password is 7654321 for both ID and password.  If this was changed, We will be happy to provide you with the steps to reset the printer.  Please contact our Desktop Printing and Imaging Solutions Department at 1-800-OK-CANON (652-2666), 8A-8P EST, Monday - Friday (excluding holidays).  The support representative can perform a printer reset after you provide proof of purchase.  I apologize for any inconvenience this may cause; however, these steps need to be provided by phone with a technician assisting you through it.

 

If you continue to have difficulties, please contact our support group using the following link:

http://Canon.us/ContactLI

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

View solution in original post

3 REPLIES 3

James_C
Moderator
Moderator

Hi rkon,

 

The factory default System Manager ID and password is 7654321 for both ID and password.  If this was changed, We will be happy to provide you with the steps to reset the printer.  Please contact our Desktop Printing and Imaging Solutions Department at 1-800-OK-CANON (652-2666), 8A-8P EST, Monday - Friday (excluding holidays).  The support representative can perform a printer reset after you provide proof of purchase.  I apologize for any inconvenience this may cause; however, these steps need to be provided by phone with a technician assisting you through it.

 

If you continue to have difficulties, please contact our support group using the following link:

http://Canon.us/ContactLI

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I have the same question for Canon imageCLASS LBP612CDW Color Laser Printer. Will this process work on my printer?

 

Thanks 

 

Mel 

Hi msinkler.

 

Yes, you will need to contact our telephone support group and they will be able to assist you with resetting the information. Please call 1-800-OK-CANON (652-2666), Monday - Friday 10:00 a.m. to 6:30 p.m. ET (excluding holidays).

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!