11-28-2012 12:16 PM
I got this after installing new ink - it worked just a bit and then when I turned printer off and on, got this msg. I took out cartridges and head, put them back in, and no change.
12-17-2015 09:52 PM
12-17-2015 09:55 PM
12-21-2015 08:16 AM
Forgrt Canon. They don't give a **bleep** about you once you have spent your money on their product. I have now bought an Epson printer which is afr better than any Canon product I have seen
12-17-2015 09:59 PM
12-18-2015 10:24 AM - edited 12-18-2015 10:26 AM
Fromjim describes taking things apart. This often does not correct the issue. Take it apart, when apart clean the head area .... CLEANING is the thing that must be done as there is ink build up. That's why I used 91% Ethyl alchohol. IT WORKS now many months later after 1st doing this. Note: the print is not perfect but very usable
04-06-2016 09:41 AM
Hi jasonventure:
I am having the same problem U052 error with my mx892 printer. I want to try cleaning print head with rubbing alcohol. Can you give me the exact instructions on how to do this? Thank you so much in advance for any help or guidance you can offer.
Cindy
p.s. This problem started a few days ago with the dreaded B200 error, which I also had last year and had to research for a week and almost junked out my 1.5 year old $400 printer, but I finally got it going again with an obscure fix
04-06-2016 01:00 PM
04-06-2016 04:34 PM - edited 04-06-2016 04:48 PM
see my previous posts for those asking how to. Simply remove inks...get 91% alchohol for Walmart. I like it because it evaporates at a moderate rate...not too fast.. Soak the ink head in GLASS (not plastic) with it. The alcohol will not damage the head as other stronger petroleums can. Use as little as possible each soaking because will need to repeat again and again. Likely use total about 1/2 a 16oz. bottle.... let dry a few hours after final. You can use Clean compressed air to speed things up to blow things out.. Quality contacts are gold plated. Not sure if these are that quality... Gold does not tarnish or oxidize, but still inspect them....can't hurt. The previous post for G&G is also helpful info.
12-20-2015 07:16 PM
@jdegann wrote:I got this after installing new ink - it worked just a bit and then when I turned printer off and on, got this msg. I took out cartridges and head, put them back in, and no change.
I have same problem What is the solution?
12-20-2015 09:50 PM
Buy a non Canon printer, they are not going to help anyone, they are too powerful and don't think they need us or our purchases, too bad, they have wonderful products, you just can't trust the company.
God bless you and help Canon change
Jim
@dtmonday wrote:
@jdegann wrote:I got this after installing new ink - it worked just a bit and then when I turned printer off and on, got this msg. I took out cartridges and head, put them back in, and no change.
I have same problem What is the solution?
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.