03-06-2022 07:08 PM
Today I received a strange error message on my Canon Maxify MB2720 printer. When I tried to print it error message B504 generated. I just purchased this printer in late September 2021. I unplugged the printer and turned it off, but it still doesn't remove the error message. Can someone please help me?
03-17-2022 03:46 PM
That error will point to a hardware issue or a problem with one of the tanks in the printer. You can open the front to where the ink loads and you can inspect the tanks to make sure they are all seated properly. If any are sticking out, you can push the tank in so it is properly seated. If that does not work, you can try unplugging the printer from the power and then pressing the power button 10 times while the printer is unplugged. After that, you can plug the printer into a different power source and you can try turning it on.
If you are using third party ink tanks they could also be the cause of the issue. Some third party tanks do not work like our factory tanks and can cause issues with the ink system. We have a service notice about the tanks and you can view it using the link HERE.
In that situation, you can check with the company that made the tank to check what options they have to manually remove the tank from the printer.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 22.214.171.124
PowerShot SX420 IS - Version 126.96.36.199
PowerShot 620 HS - Version 188.8.131.52
PowerShot SX720 HS - Version 184.108.40.206
PowerShot G1X Mark III - Version 220.127.116.11
PowerShot G7X Mark II - Version 18.104.22.168
PowerShot G9X Mark II - Version 22.214.171.124
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.