Mobile & Compact Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

SELPHY Square Q×10

I received the SELPHY Square Q ×10 for Christmas and I cannot for the life of me get it to connect to the app. It is brand new. I personally opened the box and the sample ink cartridge and sticker paper etc that came with it.  Every time I try I get ...

Selphy CP 900

I will bet blotches of yellow, red on printed pictures from time to time.  How do you clean printer so this doesnt occur

k_scott1 by Apprentice
  • 451 Views
  • 0 replies
  • 0 likes

Selphy Square QX10 Factory Reset

I have a QX10 and it used to work great and I loved it.  Then I got an iPhone 12 with the newer OS and the Selphy app was locked out of the keychain and just wouldn't talk to the printer.  This made the printer much less useful since there's no other...

mcostolo by Apprentice
  • 1201 Views
  • 0 replies
  • 0 likes

Selphy CP1300 Question Mark

What does the ? mean exactly when I try to select a photo to print and it rejects. Is the picture too low a resolution ? I seem to be able to print only above 2 MB but don't see anything about this in documentation only must be EXIF.

Bronson1 by Apprentice
  • 797 Views
  • 1 replies
  • 0 likes

Cannot set up Brand New Canon Selphy QX10 - iOS14

I've downloaded the Selphy Photo Layout app and followed the on-screen instructions but it just won't connect. Even though I've enabled all of the permissions, deleted and reinstalled the app, turned off "private address" mode in the wifi settings of...

kbraly by Contributor
  • 1746 Views
  • 5 replies
  • 0 likes

Pixma iP110 won't print B&W

Can print color images but not any B&W documents. The paper feeds and the cartridges seem to be moving but the paper is then ejected with no printing on it.  Have changed cartridges twice and each time the red LED on the cartridge lights up. Have che...

Richline by Apprentice
  • 10179 Views
  • 6 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.